Menu
- YSM-AERO Synthetic Ropes without & with Overbraid(30)
- Dyneema® Synthetic Ropes(50)
- Dyneema® Ropes with PES Overbraid & Ropes for Sailing(21)
- Synthetic Winch Ropes - Ready to Install(14)
- Winch Ropes in HMPE Jacket!(6)
- Flat Webbing Slings / Tree Strops(4)
- Synthetic Extension Ropes - Ready to Install(10)
- Recovery Kinetic Ropes(18)
- Recovery HMPE Towing Ropes(1)
- Polyester Round Slings(3)
- HMPE Rope Lifting Slings(7)
- Hawsers - Mooring Ropes for Ships(31)
- Mooring Tails with MEG4 Certificate(7)
- Double Mooring Rope Stoppers according MEG4(3)
- Polypropylene Twisted Ropes(33)
- Polypropylene Twisted Ropes Tiger (Black & Yellow)(11)
- Polypropylene Twisted Ropes Brown (Like Natural Rope)(36)
- PP Multifilament Braided Ropes(16)
- PP Multifilament Twisted Ropes(12)
- Braided Polyethylene (HDPE) Ropes Orange(3)
- Polyamide Twisted Ropes(26)
- Polyamide Braided Ropes(12)
- Polyester Twisted Ropes(0)
- Polyester Ropes for Pilot / Embarkation Ladders(1)
- Polyester Braided Ropes(5)
- Boat & Yacht Mooring Lines(31)
- Boat & Yacht Anchor Lines(17)
- Manila Natural Twisted Ropes(2)
- Cotton Natural Braided Ropes(7)
- Green Pin® Shackles(19)
- Soft Shackles(10)
- Synthetic Loops(9)
- Rope Splicing(3)
- Rope Protection(3)
- Tug Boat (Towing Lines) and Offshore Ropes(87)
- Fall Preventer Devices (FPD)(1)
- New products
- Products on sale
Search
Heavy Duty HMPE 25MM Recovery Rope 5.5MTR 57.2T with HMPE Ovebraid
Regular price:
product unavailable
add to wish list
Description
Recovery rope 5.5MTR long, terminated with protected eyes, protection also on whole rope.
The specified rope size of 25MM is a reference number corresponding to the approximate nominal core diameter in mm. The measured diameter of the finished rope is larger due to the additional protective overbraid.
Rope should easily fit through most hitches used in agriculture and industry. The photo shows a V. Orlandi AH38HA4 automatic hitch with a barrel-shaped pin, purchased specifically for the fitting.
The rope's breaking strength is 57.20T / after reduction on splice 51.49T. A standard fiber rope with a similar breaking strength would need to have diameter way above 50MM. The breaking strength was specifically selected to ensure the rope is still easy to connect and not significantly stronger than the standard hitches it will be used with.
If you're interested in a stronger ropes, just let us know - all is possible.
These are not kinetic ropes for dynamic recovering vehicles from a situation, but rather low-stretch ropes for static towing.
Using tow ropes or kinetic ropes is dangerous and requires knowledge. Even the largest rope can break or be cut.
Before using a tow rope, check whether the vehicle/equipment manufacturer allows it to be towed using the hitch you intend to use. The recommendations and best practices of those already using kinetic ropes should be followed.
Remember that any excessively bent or broken rope will be weakened, which can lead to the rope cutting well below its rated breaking strength. A twisted rope can also lead to a significant reduction in strength; a few twists per meter can result in a loss of up to 20% or more of its rated breaking strength! Excessive twisting of the rope and subjecting it to excessive strain can result in irreversible damage. Any operation where the rope is not in a straight line or rubs against any components along the way increases the risk of its use.
In case of any questions, please contact us.
Warm regards,
Team www.syntheticropes.eu
